PULSAR S FEATURES

• The best price-performance ratio - highest technologies at reasonable price
• ASTER II Bluetooth® - the latest GATE Bluetooth optical ETU for HPA replica
• Additionally stabilized nozzle ensures FPS consistency and eliminates Mid-cap syndrome
• Multifunctional port ready to connect accessories such as Bolt-catch button, magazine sensor, Hop-up chamber tracer, electric magazine power supply or a flashlight
• Simple maintenance thanks to a well-thought-of build

Caution! The purple nozzle of the HPA PULSAR S engine does not require the use of a stabilizing sleeve in the hop-up chamber. The use of a stabilizing sleeve with the purple nozzle may negatively affect engine performance.
The golden nozzle of the HPA PULSAR S engine may require additional stabilization. In this case, it is recommended to use a stabilizing sleeve in the hop-up chamber.

• PULSAR Single Solenoid

  Solenoid Voltage Range

  5-8.4 V

  Operating Pressure

  60-140 PSI – high pressure only

  Gas Consumption

  For 90 PSI and a 48 ci/0.8 l 300 bar/4500 PSI bottle – 1 PSI per shot

  Dimensions (Length x Diameter)

  88 mm x 25.4 mm

  Finished Product Weight

  75 g

  Operating Temperature Range

  min. -15° C, max. +50° C

  Relative Humidity

  ≤ 80%

  Adjustable ROF
  1 to 100 RPS
  Velocity
  200 – 550 FPS

  Operation mode
  Open Bolt

  Pressure range
  60 to 140 PSI

  Due to the nature of the design and operation of the engine, the compatibility range of the nozzle length is between 21.25 mm and 21.40 mm relative to that of the AEG nozzle

• ASTER II Bluetooth®

  Supply Voltage Range [AEG application]

  3.75 - 12.9 V

  Supply Voltage Range [HPA application]

  5 - 8.6 V

  Current Consumption

  20 mA

  Low Power Mode

  130 µA

  Dimensions (Length x Width x Height)

  43.8 mm x 28.7 mm x 5.5 mm

  Finished Product Weight

  23.4 g

  Operating Temperature Range

  min. -15°C max. + 50°C

  Relative Humidity

  ≤ 80%

  Read more about ASTER II Bluetooth®